GS1_103N0 (2G+16G) - Versión para impresión

+- FORO (
+-- Foro: TV-Box y MiniPC (
+--- Foro: Beelink / AZW (
+---- Foro: Beelink GS1 (
+---- Tema: GS1_103N0 (2G+16G) (/showthread.php?tid=10260)

GS1_103N0 (2G+16G) - Beelink - 01-12-2017

Hi dear , here comes the firmware for GS1_103N0 !   Risitas

Current version : GS1_103N0
Based on : GS1_101N0/GS1_102N0

USB  zip :(update_GS1_103N0.img):

SD card zip : (

usb burning tool :

USB updating :

1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;
4. Click the lunch button on this interface ;

5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a  recognization sign that the red X ( upper right corner)turns green .
6. Finish this updating .

Improvement :

     1. We solved the problem that the rigion area on UI gets a crash ;

     2. The wifi bugs of allwinner have been removed ;
     4. You can copy what you want in Bee Files Explorer quickly ;
     5. The fisher joy app has been removed ;
PS :Now you can update from the GS1 101N0 to GS1 103N0 with SD card also .  [Imagen: loveliness.gif]

SD card updating :

1. copy this file ( to your TF card or U-disk and then insert the TV box ;
2. go in the setting  > click the option of "about the media"  >  choose the first option > choose file > load the ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power 
   supply must be firmly good enough to finish this updating , power outages would contribute to a failure .

you can contact with me if you meet some problems .
email : / skype : +86 18772960513