FORO AndroidPC.es
GS1_104N0 (2G+16G) - Versión para impresión

+- FORO AndroidPC.es (https://foro.androidpc.es)
+-- Foro: TV-Box y MiniPC (https://foro.androidpc.es/forumdisplay.php?fid=7)
+--- Foro: Beelink / AZW (https://foro.androidpc.es/forumdisplay.php?fid=182)
+---- Foro: Beelink GS1 (https://foro.androidpc.es/forumdisplay.php?fid=194)
+---- Tema: GS1_104N0 (2G+16G) (/showthread.php?tid=10364)



GS1_104N0 (2G+16G) - Beelink - 13-01-2018

Hi dear , here comes the firmware for GS1_104N0 !

Current version : GS1_104N0
Based on : GS1_101N0/GS1_103N0

USB  zip :(update_GS1_104N0.img):

later

SD card zip : (ota_GS1_104N0.zip):

later


usb burning tool :


https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d230f6469689be6c709dbf403d




Improvement :


     1. Sometimes some errors occur to this device when the frame rate is not consistent 
        with HDMI output frequency , such as  image  trembles often . now you can solve 
        this problems with a method , some tips as follows , 

        Settings->advanced display >(√) Playback auto switch FPS
       
        PS : It may get a black screen briefly .


    2. Kodi can perform much more better than before .


    3. Some shortcuts have been added to remote for popular demands , as the picture shows,


        [Imagen: entry.jpg]
        
        [Imagen: shortcuts.jpg]
   
     4. Google chrome has been reinstalled for you .
  
     5. You could get more wonderful experience on dolby and dts . 
   
PS :Now you can update this device from the GS1 101N0 to GS1 103N0 with SD card also .  [Imagen: loveliness.gif]


USB updating :

1. Install the allwinner USB burning tool first 。


2. Click the PhoenixUSBPro.exe in your desktop and run it .


3. Click the upper left button to load the firmware file from your pc ;
4. Click the lunch button on 

     this interface .

5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind 

   that the USB2.0 is used for updating but USB3.0 . after that , it is a  recognization sign that 
   the red X ( upper right corner)turns green .

6. Finish this updating .



SD card updating :


1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box .

2. go in the setting  > click the option of "about the media"  >  choose the first option > choose file > 

   load the ota_GS1_101N0.zip .

3. the systen will recognize this update zip automatically when you run it well and then shut down to 

    go in the update mode , you need to make sure that Power supply must be firmly good enough to 
    finish this updating , power outages would contribute to a failure .


   you can contact with me if you meet some problems .



   email : chanchan@bee-link.com / skype : +86 18772960513