Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
Hola a todos. soy nuevo en este foro, y tengo una duda. quiero hacer root al mx5 pero mi modelo no trae la app de update. se puede conseguir e instalar esta para no tener que entrar en recovery? Mi numero de compilacion es android 4.2.2 201305515 no se si existe una mas actual y si merece la pena instalarla. Saludos
Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
Si.lo entiendo.entonces tendre que conseguir un teclado por usb para hacer desde recovery. Y sobre la versión merece la pena actualizar? Muchas gracias. Saludos
Mensajes: 3,137
Temas: 50
Registro en: Dec 2012
Reputación:
21
Claro que merece la pena actualizar, siempre y cuando tu nand sea de las buenas.
Apadrina una ROM, invítame a una birra! :D
Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
Lo de la nand de momento no se puede saber, no? No existe aplicación.muchas gracias por ayudarme ya que ando un poco perdido. Saludos.
Mensajes: 3,137
Temas: 50
Registro en: Dec 2012
Reputación:
21
Solo se puede saber mediante cable uart, y en el mismo proceso hay riesgo de que si és defectuosa se termine de estropear.
Apadrina una ROM, invítame a una birra! :D
Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
Pues asi se quedara entonces. Por si acaso no me arriesgo a actualizarlo, no vaya a ser.... Muchas gracias
Pues asi se quedara entonces. Por si acaso no me arriesgo a actualizarlo, no vaya a ser.... Muchas gracias
Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
solucionado. muchas gracias
Mensajes: 9
Temas: 2
Registro en: Oct 2013
Reputación:
0
El vendedor me mando esto
Please download the root file from below link:http://www.sendspace.com/pro/dl/zq2hjp How to root Bluetimes MX5:1. Unzip the downloaded zip file, you will got 4 files named "4.2_ROOT.zip", "u-boot-m6.bin", "uImage_recovery-m6" and "nand_erase_whole". 2. Copy these 4 files to the root of SD card/USB flash drive, insert SD card/USB flash drive to MX5.3. Connect power adapter to MX5, press and hold the power button on the front panel, until you see the blue LED on the power button start flashing, you can release the power button.4. MX5 will enter recovery mode, use the remote control to move the cursor to "Apply Updating from EXT", then select SDCARD and the root.zip file.5. When it prompt that the installation complete, use the remote control to select Reboot this device.Now this item was rooted successfully.If any questions, feel free to contact us.RegardsLinda